- Pure sine wave output for sensitive electronics
- VE.Direct communication port for monitoring and configuration via computer or mobile devices (requires VE.Direct to USB cable or VE.Direct Bluetooth dongle)
- ECO mode: switches to standby when load <15W; auto resumes periodically
- High start-up power for devices with surge demands (LED lamps, halogen lamps, power tools)
- Remote on/off switch compatible via two-pole connector
- LED fault diagnosis (see manual for details)
- Option to integrate with Filax Automatic Transfer Switch for seamless AC source switching (<20ms)
- DC connection with screw terminals
- Proven reliability with full-bridge plus toroidal transformer topology, short-circuit and overheating protection
- 12 Volt
- Cont. power at 25°C (1)500VA
- Cont. power at 25°C / 40°C 400 / 350W
- Peak power 900W
- Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
- Input voltage range 9,2 – 17v
- DC low shut down (adjustable) 9,3v
- Dynamic (load dependent) DC low shut down (fully configurable)
- DC low restart and alarm (adjustable) 10,9v
- Battery charged detect (adjustable) 14,0v
- Max. efficiency 90%
- Zero-load power 6vW
- Default zero-load power in ECO mode
- (default retry interval: 2,5 s, adjustable) 1
- ECO mode stop and start power setting Adjustable
- Protection (2) a – f
- Operating temperature range -40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C
- Humidity (non-condensing) max 95%
Technical Information
SKU: PIN121501400
Brand: Victron